Showing posts with label manual. Show all posts
Showing posts with label manual. Show all posts

May 26, 2008

Installation without YaST

With 96MB of RAM, Linuxrc will not start on 11.0 (RC1). So I decided to exploit the image based installation, and not to use YaST at all for a change.

The target machine has dual boot and I am logged on the other system via the network, so I could paste this all in. Fasten your hats...

Update: Planet SUSE is eating the dollar variables :-( See the original post at Blogspot for the real thing.

Target partition:
# mkfs.ext3 /dev/hda1
# mount /dev/hda1 /mnt

A flash drive with images and kernel:
# mount /dev/sda1 /media
# cd /media/misc

Note I used unlzma beforehand because the target machine is way slow for that
# du -m *
5 base-i386.tar
12 base-meta-i386.tar
527 common-base-i386.tar
22 kernel-default-2.6.25.4-8.i586.rpm

Unpack!
# for i in *.tar; do dd if=$i bs=1M | tar -C /mnt -xf -; done &

While it is running, watch the progress:
# pkill -USR1 -x dd
...
552202240 bytes (552 MB) copied, 709,291 s, 779 kB/s

# cp kernel-default-*.i586.rpm /mnt/tmp

Before installing the kernel, we must do some setup so that the post-install script works.

# for i in dev proc sys; do mount --bind /$i /mnt/$i; done

# chroot /mnt
Now I use ## to mark that we are chrooted in the target system.

Modify partitions as needed.
Also see ls -l /dev/disk/by-id
## ROOT=/dev/hda1
## SWAP=/dev/hda4
## cat <<EOF > /etc/fstab
$ROOT / ext3 acl,user_xattr 1 1
$SWAP swap swap defaults 0 0
proc /proc proc defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto 0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
EOF

You probably don't need to set this one and the others starting with FIX_

## FIX_BOOT=acpi=force
## GROOT="(hd0,0)"
## cat <<EOF > /boot/grub/menu.lst
default 0
timeout 60
gfxmenu $GROOT/boot/message

title openSUSE 11.0
root $GROOT
kernel /boot/vmlinuz root=$ROOT resume=$SWAP vga=787 $FIX_BOOT
initrd /boot/initrd

title Failsafe -- openSUSE 11.0
root $GROOT
kernel /boot/vmlinuz root=$ROOT ide=nodma apm=off acpi=off noresume nosmp noapic maxcpus=0 edd=off x11failsafe vga=787
initrd /boot/initrd
EOF

Put GRUB to MBR
## GDEST="(hd0)"
## cat <<EOF > /boot/grub/device.map
$GDEST /dev/hda
EOF

## cat <<EOF > /etc/grub.conf
setup --stage2=/boot/grub/stage2 $GDEST $GROOT
quit
EOF

## sysconfig() { sed -i -s "/^$2=/s/=\"/=\"$3/" /etc/sysconfig/$1; }

I also need this. You probably don't
## FIX_MODS="ide-generic ide-core"
## sysconfig kernel INITRD_MODULES "$FIX_MODS"

I don't know whether these 2 are strictly necessary
## sysconfig bootloader LOADER_TYPE grub
## sysconfig bootloader LOADER_LOCATION boot

## rpm -Uhv /tmp/kernel-default-*.rpm
It will get the resume device wrong (according to *current* swap partition), but it seems harmless.

## grub-install

## passwd
## chkconfig SuSEfirewall2_init on
## chkconfig SuSEfirewall2_setup on

## exit
# reboot

BTW, I am fed up with the Blogger editor. Can I use an offline one so that I don't have to change blog hosting?